BALSEUROP is an end grain balsa wood manufacturer. Since April 2011 we are part of Gurit Holding. We are present in the market through BALSAFLEX trade mark supplying our balsa panels all over the world mainly to the rotor blade manufacturers. The headquarters are located in Spain and our production center with 2 independent facilities is located in El Ecuador with a production capacity of 900 containers/year which position us as the 2nd largest producer of end grain panels. Rigorous production process control organization of the production center and quality control position Balsaflex as number 1 in quality. The production center is working according to ISO 9001 and 14001. Our products have Germanischer Lloyds certificate.

Product category：Balsa

The company is specialized in the production of guillotine, this machine is widely used in cutting aramid fiber, polypropylene fiber, polyester, acrylic, carbon fiber, glass fiber, metal fiber, cotton rope, such as chemical fiber, textile short fiber, and also can be applied to cut thin metal fiber and plant fiber.

Product category：Carbon Fiber | Fiber Treatment & Handling Systems

Main products include vacuum materials, FRP products, foam board and metal products. Being one of the professional factories of vacuum materials production in China, we have been in the line of producing and exporting vacuum materials (release films, infusion media, vacuum film, and sealant tapes, spray contact and so on). The company has a full set of infusion media equipment, the most advanced 5 layers composite film blowing machine, sealant tapes machine and pipe production machine. The products are mainly used in wind turbine blades, aerospace, boat hulls and so on.

Product category：Foam | Mould Release Materials | Bagging Materials | Sealing Materials | Other Accesory Materials

Basis Specialty Material Co., Ltd is established in 2005 and We are specialized company for surface treatment on activated carbon and Carbon fiber, related products. MCF(Metal Coated Carbon Fiber) is a high-performance fiber with good electrical and mechanical properties. It is mainly used for EMI shielding as a filler to make compounding pellets with various resins. Either or both electroless and electro planting process can offer single or dual metal layers onto the surface of carbon fibers according to the requirements.

Product category：Carbon Fiber | GMT/LFT | Fillers | Raw Materials Related to Resin Production | Fiber Treatment & Handling Systems

With 2010 sales of EUR 10.2 billion, Bayer MaterialScience is among the world's largest polymer companies. Business activities are focused on the manufacture of high-tech polymer materials and the development of innovative solutions for products used in many areas of daily life. The main segments served are the automotive, electrical and electronics, construction and the sports and leisure industries. At the end of 2010, Bayer MaterialScience had 30 production sites and employed approximately 14,400 people around the globe. Bayer MaterialScience is a Bayer Group company.

Product category：Other Resins

We are focusing on the development of 3D braiding machines and the manufacture of preforms of 3D-braided composites. The 3D rotatory braiding machine, which adopted modularized technology, increases the manufacturing efficiency and has obvious advantage on automatic manufacture, cost, and stability of size and performances of preforms. Our 3D-full-5directional braiding technology can further strength the axial performances of the composites. 3D braiding machines of our company are two kinds: rectangular and circular type, and are suitable to braid rectangular and combined rectangular 3D performs and pipe preforms with different cross section shapes separately, all of them may be either equal or different in section and thickness.

Product category：Carbon Fiber | Prefrom

The company is a distributor of Graco Inc. which is global famous fluid handling company in the world. It can provide FRP equipment, Gel-coat equipment, RTM injection equipment and PU spray and injection equipment to composite end users. We have branches in Shanghai, Shandong province, Sichuan province and North-east China. Therefore, we can provide service quickly. We can provide composite material as well. Include gel-coat material, Resin, model material, Fiber-glass material, mold release, vacuum bag, and special tools. Also, we can provide professional model manufacture service.

Product category：Gel Coat | Bagging Materials | Finished Composites Production System | Accessory Equipment & Tools | Mould and Its Related Equipment

Established in October 1994, BW TECHTEXTILE is a leading functional and high-performance technical textiles supplier, specializing in providing military textiles and technical textiles. The company is organized into four business units, including a joint-venture company and three subsidiaries. After more than 20 years’ development, BW now has six major categories of products: military textiles, textiles for nuclear, biological or chemical (NBC) protection, textiles for special industrial protection, textiles for fire protection, police and occupational safety, textiles for biological, medical and chemical protection, lifesaving and security airtight products.

Product category：Aramid Fiber | Hybrid Cloth, Tape & Mat | Other Reinforcements | Finished Composites Parts

Beijing Composite Materials Co., Ltd. inherited the complete key technology, major production lines from the BEIJING FRP RESEARCH AND DESIGN INSTITUTE since the foundation in 1958, and is a hi-tech enterprise specially engaged in the field of FRP/composite. With the strong capability of technology and industrialization, the company are supplying a full solution for the new material application. The products are applying to many fields like aviation, spaceflight, construction, wind power energy, communication, electrical, chemical and so on.

Product category：Glass Fiber Woven | 3D Woven | Research & Design | Finished Composites Parts

As a professional trading company of FRP raw and auxiliary materials, We mainly engage in importing advenced materials from Europe and the United States,as well as promoting the sales of high-quality domestic products.Adherting to the philosophy of “Give Top Priority to Quality and Service in Business”, we not only market or sell products but also provide consulting sevices and technical supports to the customers coming from the industries of aeronautics and aerospace ,wind power, marine, transportation, sport equipments, architecture and construction, etc. We sincerely expect to cooperate with people of all trades on the basis of mutal-benefit and mutual-development. Range of Products: -Balsewood Core & Plastic Honeycomb Core, By Nide-Core -PMI Fire-retardant Foam, by Rohacell -Internal & External Mold Release Agents -U-Pica Mat -Polyester Surface Viels, by PFG,USA -Anticorrosive& Fire-retardant Resins, by AOC,USA -Auxiliary Materials for Vacuum Bagging Process -Organic peroxides, by Nantong Dasheng -Product Gelcoat & Tooling Gelcoat, by Shanghai Huazheng

Product category：Foam | Honeycomb | Balsa | Sandwich Panel | Mould Release Materials | Bagging Materials

The company is one of the national high-tech enterprises with technical innovation, production, sale, and after-sales services. We have obtained the standard certification ISO9000:2008. The “automation and control technology for further processing in foil materials” is the main direction of business. We produce the automatic equipments with high-precision, high-performance aramid fiber honeycomb core materials. We have advanced design concept and innovation in the area of aramid fiber honeycomb automatic devices, aluminum automatic devices, and non-standard composite materials devices.

Product category：Honeycomb | Other Equipment & Tools

The company is tech-based enterprise which integrates the scientific research, sale and technical support about thermosetting resin and related intermediates. Goldenjet focuses on developing new environmentally-friendly high-performance thermosetting resins. In aerospace, electronics, construction, transportation and many other fields, we can help client to create value. Main business involves： 1. Provide Modified Phenolic Resin, Bismaleimide Resin，Polyimide Resin，Epoxy Resin and related intermediates; 2. Develop resolving service on thermosetting resin technology; 3. Solution on technology of new chemical material.

Product category：Epoxy Resin | Phenolic Resin | Other Resins | Foam | Pregreg | Prefrom | Adhesive | Additives | Coating | Sealing Materials

The company's main business is vacuum auxiliary materials, the main products are vacuum bag film, sealing tape, diversion net, perforated isolation film, spiral pipe, PE pipe, temporary plastic, plastic injection base and other auxiliary products. The company has diversion net production equipment, perforated isolation membrane equipment, PE pipe and spiral pipe production line, sealing tape production line, products are widely used in wind blades, aerospace, shipping, trains, automotive industry, sports equipment, storage tanks and other fields; The company provides OEM products!

Product category：Adhesive | Bagging Materials | Sealing Materials | Other Accesory Materials

BEIJING ITA-TECH CO.,LTD focus on supplying prepreg, decorative film,specialized high-performance composites company. ISOVOLTA is global leader of prepreg, decorative film and other composite products. Our products have been widely used in aircraft, railway and ship interior, as the interior material supplier of Airbus, Alstom, Bombardier. AIRPREG prepreg and RAILDEC decorative film, because of perfect surface quality, excellent mechanical properties and FST (Fire,Smoke,Toxicity)regulations, has been widely used. ISOVOLTA has a long-term cooperation with ITA-TECH, we can supply the best interior products and sales service to our customer.

Product category：Pregreg | Other Accesory Materials

KEMIBOND gains outstanding reputation with great product quality. Beijing Kemibond Advanced Materials Co., Ltd is one of the earlier high-tech companies related to adhesives in China, and we focus on research and develop advanced sealing and bonding materials for various industries. KEMIBOND create intelligent bonding solutions for automotive, electronics, household, new energy and rails. Also KEMIBOND is an expert in power, petrochemical, metallurgy and construction machinery to solve problems on sealing, bonding and protection. The research contains silicone sealant, cyanoacrylate, structural adhesive, anaerobic adhesive, UV adhesive, epoxy adhesive and coating.

Product category：Adhesive

The company was established in October 15, 2007, and restructured from the Fiber Department of Beijing FRP Research & Design Institute (Beijing 251 Factory). The original Fiber Department of Beijing FRP Research & Design Institute founded in 1970, was a high-tech enterprises which specialized in the application research, development and producing of glass fiber. In 2007, for industrial restructuring, the Fiber Department was transformed into Beijing Koningshunda Glass Fiber Products Co., Ltd with the original system. The company is mainly engaged in research and development of glass fiber, producing and sales of glass fiber, and can provide related technical services and technical advice, and also sale glass fiber reinforced plastic raw materials, glass fiber production and processing equipment. There are over 150 sets of equipment, and three production lines in the company, with a set of comprehensive quality management system. The company can product all kinds of glass fiber fabric more than 8 million meters, and glass fiber yarn more than 5000 tons. The products are widely used in Aeronautics and Astronautics, municipal construction, petro-chemical, transportation, sports equipment, ships and other fields. Strengthen the certification of GB/T19001 (ISO9001) quality system.

Product category：Glass Fiber Woven

The company is mainly engaged in epoxy resin, cyanate resin, PEEK and other unidirectional prepreg strips impregnated with 20%-30% resin. They are mainly divided into carbon fiber thermosetting tape and thermoplastic tape. These tapes don't need isolation paper and can directly be applied to various types of filament winding and fiber placement machines. Resin control is better with no resin adhesion on the surface. At the same weight, the fiber content increased by 10-20% compared with the wet method. Interlaminar shear force, elastic modulus and tensile strength of the fiber are greatly increased. After curing, there is no bubble between layers. Surface features are better and the precision is higher, solving the problems of bubble, stratification and cavity area in the wet process.

Product category：Carbon Fiber | Polyurethane Resin | Pregreg | Prepreg Production and Handling Systems | Finished Composites Production System

Beijing National Innovation Institute of Lightweight Co.,Ltd (CAMTC) was founded in 2017, the registered capital is 256 million. CAMTC focus on the great national demand for lightweight materials, forming manufacturing technology and equipment, carries out research and achievements transformation on key generic technologies such as lightweight material production and preparation technology, component forming manufacturing technology, digital forming equipment and production line. CAMTC has 1 academician of Chinese Academy of Engineering, 6 experts enjoying special government allowance, 45 researchers and senior engineers, 16 tutors, 7 postdocs in the station, 99 doctors and masters.

Product category：Epoxy Resin | Sandwich Panel | GMT/LFT | Finished Composites Production System | Finished Composites Parts

Founded in 1964,Beijing Plastics Research Institute is mainly involved in technical development of plastics processing, production and applications. In 2002, square carriers for silicon wafer cleaning are developed to equip solar cells in accordance with domestic development of solar cell industry. Now, there are four grades of wafer carriers, i.e. 103mm,125mm, 150mm and 156mm. Beijing Plastics Research Institute produces PVDF resin sheets using imported PVDF raw materials. The products have excellent corrosion resistance, thermal properties, as well as outstanding electrical, mechanical properties. The plate also has excellent anti-aging properties, thus can be widely used in petrochemical, machinery manufacturing, metallurgy, food, paper producing, textile, semiconductor, pharmaceutical, nuclear industry and other areas. Currently there are two kinds of PVDF sheet, backlining-glassfibic clothes and knitted plain weaves, both could be adhered to glass fiber reinforced plastics, stainless steel and other materials by binding agents, which now have been widely used in chemical storage tanks and inside lining of pipes because of its excellent anti-corrosive property.

Product category：Glass Fiber Cloth, Tape, Strand & Mat | Other Accesory Materials

QUANTUMETA is a professional solution provider of high performance composites. Our product portfolio covers modified UHMWPE fiber, high performance fabrics including modified UHMWPE fabrics, modified UHMWPE/Carbon hybrid fabrics and prepreg, modified UHMWPE/glass fiber hybrid fabrics, high strength UHMWPE fiber reinforced TPU membranes and salvage buoyancy airbags. With advanced technologies and innovative solutions, QUANTUMETA serves a wide range of applications and markets like lightweight vehicle, maritime engineering, railway transportation, special buildings and sports equipment, meeting customers' ever-increasing needs for lighter-and-stronger composites.

Product category：Hybrid Cloth, Tape & Mat | Other Reinforcements | Pregreg

Founded in June, 2008, it is the wholly owned subsidiary of Sinoma Science & Technology Co., Ltd. It inherits the superior resources from Beijing FRP Research and Design Institute. We have an outstanding professional and technical team, advanced LFT-D online mixing injection /molding line, SMC sheet /BMC line, series dedicated presses, injection production line, RTM production line, coating line, automotive interior production line equipment and so on. Now established a long-term partnership with Cummins, China National Heavy Duty Truck, Shanxi Heavy Duty Truck, Foton, Dongfeng, FAW automobile and engine manufacturers. The company obtains ISO/TS16949, ISO14001, and GB/T28001 systems.

Product category：3D Woven | Research & Design | Technology Transfer | Engineering | Finished Composites Parts

Beijing Terminator Technology Development Co., Ltd. is committed to the industrial R&D and application of space-level high modulus carbon fiber materials. The company’s core R&D team has fabricated the “Pitch-based High Modulus Carbon Fiber” successfully in the process of tackling key technical problems over more than ten years. The average initial modulus tested by Ningbo Institute of Industrial Technology, CAS is up to 587.17GPa, which is equivalent to the international advanced level. At the moment, Ningbo Factory subordinated to TMNTCF is under construction. The quantity production era of domestic space-level high modulus carbon fiber is coming soon.

Product category：Carbon Fiber | Research & Design | Testing | Technology Transfer | Engineering

Our company manufactures and sells ceramic fiber, bio-Soluble ceramic fiber, carbon, kevlar and glass fiber textile products and blankets, felts, boards, paper, special shaped parts that made of ceramic fiber and super wool, we also produce all kinds of high temperature resistance, thermal insulation, fireproof, temperature protective, high temperature sealing products.

Product category：Glass Fiber Roving & Yarn | Glass Fiber Cloth, Tape, Strand & Mat | Glass Fiber Woven | Carbon Fiber | 3D Woven

We have focused on UV curing prepreg laminate for over 10 years. It is one kind of prepreg which glass fiber is reinforcement and vinyl ester or UP resin combined with functional additive is matrix. It is suitable for corrosion protection of sewage pool, chemical tank lining, equipment of flue gas desulfurization, HDD pipeline coating protection, making GRP product and etc. This material has many key advantages. 80% VOC emission will be reduced compared to traditional by hand method. It has better final quality compared to traditional manually products. We have a new product which is a continuous fiber reinforced thermoplastic composite laminate. It is applied in footwear, skates and recreational equipment.

Product category：Pregreg | Finished Composites Parts

Beijing YUNS Technology Co., Ltd,a Beijing based high-tech enterprise, was established in 2015. We're specialized in the application of three-dimensional technology in all walks of life. Our main business includes 3D digital industry comprehensive solution and project service, international 3D technology hardware and software sales agent, 3D technical service and we also create our own products.Since its foundation, we have been committed to the research and development of 3D digital integrated solutions and its corresponding project technical services. Providing users with a package of service including hardware, software, technical support and project cooperation,our company has successfully provided an excellent integrated solution based on 3D technology for many industries.

Product category：Carbon Fiber | Finished Composites Production System | Research & Design | Other Services | Finished Composites Parts

It was established in 1997 and registered in Tianjin Port Free Trade Zone. It is an enterprise owned by Japanese. Meanwhile, it is the general agent of Ajinomoto Fine-Techno Co., Inc. in China. The company mainly manages in various products such as one component latent curing agent (AJICURE PN-23, etc.), pigment dispersing agent “AJISPER”, coupling agents “PLENACT”, one component epoxy adhesive “PLENSET”, resin stabilizer “PLENLIZER” and Polyimide film filler "TOPFLOW". Mainly related to the downstream industries for the electronic binder industry, carbon fiber composite materials industry, ink and paint industries.

Product category：Additives | Raw Materials Related to Resin Production | Raw Materials Related to Pregreg Production

The company is a wholly owned subsidiary of BERGOLIN (Germany), established in 2009. Together with the subsidiaries Bergolin Polska and TMP Tenax Marine Paints, BERGOLIN is developing international markets with a uniquely versatile range of high-quality coating systems: from decorative furniture paint to coatings for general industry and automotive supplier use to coating materials for heavy duty corrosion and construction protection - all of this with 100 years of experience! Not just our products but also our development and production facilities adhere to modern technical standards and fulfill the highest quality and environmental protection requirements (ISO-9001/2008).

Product category：Gel Coat | Coating

Bluestar (Chengdu) New Materials Co., Ltd. is owned by Bluestar Group of Chemchina, it’s a chemical new materials production enterprise that is mainly known as F-2 para-aramid fiber, also called aramid 1414 (or aramid II). Since 1980’s, Bluestar (Chengdu) New Materials Co., Ltd began the study on STARAMID F-2 and constantly committed to the research and development of aramid fiber, and successively got major breakthroughs in key technologies of resin polymerization, spinning, solvent recovery. A continuous operation pilot line with a capacity of 50t/a was built from 2005 to 2007 and the product properties reached the leading domestic level.

Product category：Aramid Fiber

The high-tech product "three-dimensional spacer fabric and its composite materials" developed by the company has passed the appraisal of national scientific and technological achievements and the technology has reached the international advanced level. The project has been included in the National High-tech Research and Development Plan (863 Plan) of 2006 and the Major Science and Technology Research Plan of Jiangsu Province. The product has won the excellent innovation product award of the 12th China Composite Exhibition JEC and the key technology has won 24 national patents. In 2007 it passed the ISO 9001 quality system certification, and was appraised as AAA credit enterpriseby the People's Bank of China and Jiangsu Quality Reliable Enterprise by the Provincial Quality Assurance Center.

Product category：3D Woven | Other Reinforcements | Other Core Materials | Finished Composites Parts | Others

BYK is one of the world’s leading suppliers in the field of additives and measuring instruments. Additives are chemical substances which, when used in small quantities, improve product properties such as scratch resistance or surface gloss. Manufacturing processes are also optimized by the addition of additives. The coatings, inks, and plastics industries are among the main consumers of BYK additives. Yet with the production of oil and gas, the manufacture of care products, the production of adhesives and sealants, and construction chemistry, too, BYK additives improve the product characteristics and production processes. Today the company employs more than 2,300 people worldwide and forms part of the ALTANA Group.

Product category：Additives