The company is specialized in the production of guillotine, this machine is widely used in cutting aramid fiber, polypropylene fiber, polyester, acrylic, carbon fiber, glass fiber, metal fiber, cotton rope, such as chemical fiber, textile short fiber, and also can be applied to cut thin metal fiber and plant fiber.

Product category：Carbon Fiber | Fiber Treatment & Handling Systems

Basis Specialty Material Co., Ltd is established in 2005 and We are specialized company for surface treatment on activated carbon and Carbon fiber, related products. MCF(Metal Coated Carbon Fiber) is a high-performance fiber with good electrical and mechanical properties. It is mainly used for EMI shielding as a filler to make compounding pellets with various resins. Either or both electroless and electro planting process can offer single or dual metal layers onto the surface of carbon fibers according to the requirements.

Product category：Carbon Fiber | GMT/LFT | Fillers | Raw Materials Related to Resin Production | Fiber Treatment & Handling Systems

We are focusing on the development of 3D braiding machines and the manufacture of preforms of 3D-braided composites. The 3D rotatory braiding machine, which adopted modularized technology, increases the manufacturing efficiency and has obvious advantage on automatic manufacture, cost, and stability of size and performances of preforms. Our 3D-full-5directional braiding technology can further strength the axial performances of the composites. 3D braiding machines of our company are two kinds: rectangular and circular type, and are suitable to braid rectangular and combined rectangular 3D performs and pipe preforms with different cross section shapes separately, all of them may be either equal or different in section and thickness.

Product category：Carbon Fiber | Prefrom

The company is mainly engaged in epoxy resin, cyanate resin, PEEK and other unidirectional prepreg strips impregnated with 20%-30% resin. They are mainly divided into carbon fiber thermosetting tape and thermoplastic tape. These tapes don't need isolation paper and can directly be applied to various types of filament winding and fiber placement machines. Resin control is better with no resin adhesion on the surface. At the same weight, the fiber content increased by 10-20% compared with the wet method. Interlaminar shear force, elastic modulus and tensile strength of the fiber are greatly increased. After curing, there is no bubble between layers. Surface features are better and the precision is higher, solving the problems of bubble, stratification and cavity area in the wet process.

Product category：Carbon Fiber | Polyurethane Resin | Pregreg | Prepreg Production and Handling Systems | Finished Composites Production System

Beijing Terminator Technology Development Co., Ltd. is committed to the industrial R&D and application of space-level high modulus carbon fiber materials. The company’s core R&D team has fabricated the “Pitch-based High Modulus Carbon Fiber” successfully in the process of tackling key technical problems over more than ten years. The average initial modulus tested by Ningbo Institute of Industrial Technology, CAS is up to 587.17GPa, which is equivalent to the international advanced level. At the moment, Ningbo Factory subordinated to TMNTCF is under construction. The quantity production era of domestic space-level high modulus carbon fiber is coming soon.

Product category：Carbon Fiber | Research & Design | Testing | Technology Transfer | Engineering

Our company manufactures and sells ceramic fiber, bio-Soluble ceramic fiber, carbon, kevlar and glass fiber textile products and blankets, felts, boards, paper, special shaped parts that made of ceramic fiber and super wool, we also produce all kinds of high temperature resistance, thermal insulation, fireproof, temperature protective, high temperature sealing products.

Product category：Glass Fiber Roving & Yarn | Glass Fiber Cloth, Tape, Strand & Mat | Glass Fiber Woven | Carbon Fiber | 3D Woven

Beijing YUNS Technology Co., Ltd,a Beijing based high-tech enterprise, was established in 2015. We're specialized in the application of three-dimensional technology in all walks of life. Our main business includes 3D digital industry comprehensive solution and project service, international 3D technology hardware and software sales agent, 3D technical service and we also create our own products.Since its foundation, we have been committed to the research and development of 3D digital integrated solutions and its corresponding project technical services. Providing users with a package of service including hardware, software, technical support and project cooperation,our company has successfully provided an excellent integrated solution based on 3D technology for many industries.

Product category：Carbon Fiber | Finished Composites Production System | Research & Design | Other Services | Finished Composites Parts