The company is a wholly owned foreign subsidiary of Nabertherm GmbH which was set up in 2005, before that our Shanghai Representative Office was set up in 1999. We mainly engaged in Nabertherm industrial furnaces sales and after sales in China. Furnaces type: nitric acid catalyst debinding-, thermal debinding-, vacuum sintering-, muffle-, chamber-, tube-, crucible melting and holding-, gradient-, bogie hearth furnaces, etc. In powder metallurgy industrial, our furnaces are mainly used for MIM & CIM's debinding and sintering. Nabertherm does not only offer the widest range of standard furnaces but also tailor-made solution. At the same time, there are also full-time Chinese after-sales service engineers for the customers.

Product category：Autoclave

Our company have imported CNC machine from BELOTTI in Italy. It is special for FRP cutting. This machine is used with Europe and five axis machining shipbuilding technology synchronization, using digital simulation, can be in the development stage can engrave compares narrow model, cutting and grinding compares foam model, cutting and grinding FRP model finished product, whose precision and high efficiency is far better than artificially molding, can greatly reduce costs and loss. In addition, 5 axis machining center is also widely used and traffic, furniture, aviation, space and many other fields.

Product category：Cutting Machines

Our company, which specializes in non-standard equipments, enjoys rich experience in producing, and designing GRP pultrusion machine. Our caterpillar and hydraulic pultrusion machines are widely used in the technology of unsaturated polyester resin, vinyl resin, phenolic resin, epoxy resin, and polyurethane resin. Our equipments not only enjoy rich experience in polyurethane resin, but play well in carbon fiber pultrusion and pull winding as well. Apart from domestic market, our machines have been exported to Ukraine, Pakistan, Malaysia, etc. We've gained favourable reception from our clients.

Product category：Finished Composites Production System

It is a high-tech company established by the Shanghai Institute of Optic and fine mechanics and the Hongta Group in nanjingeconomic and technological development zone. Our company manufactures advanced laser equipment. Our products include infrared, green light, ultraviolet, deep ultraviolet lasers and laser systems.Our company has got the ISO9001 quality management system certification, and ISO14000 environmental management system certification. The company has always adhered to the "customer first" and "market-oriented" concept, through years of market development, has several offices distributed in China's major central cities, established a sound market service system.

Product category：Cutting Machines | Other Equipment & Tools

Elstein-Werk was founded in Northeim in 1950 as the only specialty factory for ceramic infrared heaters worldwide. Since the beginning we have been using our own patents and procedures to develop infrared heaters that still to this day set the standard for state-of-the-art design, power, and quality. With constant pioneering work and continuous product development, we have always been able to tap into technically and economically important areas of application for infrared heating. Elstein-Werk , with their different geometries, power levels, and thermal reaction times, offer numerous possible solutions for heating and drying processes. Elstein are deployed everywhere with great success. Our decades of experience and the technical expertise of our competent engineers are at your disposal.

Product category：Fiber Production System | Fiber Treatment & Handling Systems | Resin Production and Handling Systems | Finished Composites Production System | Autoclave

Product category：Fiber Treatment & Handling Systems | Finished Composites Production System | Inspection Instrument & Equipment | Environmental Protection System | Other Equipment & Tools

The company is one of the biggest professional manufacturers which specialize in design, development and production of pultrusion moulds for different fiberglass reinforced plastic products all over the world. We now have over 80 employees, an annual sales that figure that exceeds USD six million and are currently exporting more than 40% worldwide. And gained a global sales network reaching Europe and America, Oceania, Africa, Middle East, Southeast Asia and other countries, and we have own good praise from many customers.

Product category：Finished Composites Production System | Mould and Its Related Equipment | Cutting Machines

The company was founded in 2000. The company is specialized in researching and manufacturing FRP/CFRP composite pultrusion pullwinding machine, the R&D Center area is 5000 square meters with more than 10 different processing pultrusion machine. The company won the national science and Technology Progress Award in 2013 and won JEC Innovation Award in 2017. The main products are through the ISO9001 quality management system certification and the EU CE safety certification.

Product category：Finished Composites Production System | Finished Composites Parts

The company is the authorized distributor for Magnum Venus Products (MVP) in china. MVP has been active in the China market since 1983, and continues to be the world leader in composites technology. Regardless of the customer's needs, MVP can provide the most modern application technology and machinery: Chopper, gelcoat, Mini-Link, adhesive, putty, and reciprocator RTM/LRTM, we can provide hands-on LRTM training (including silicon membrane making technology).

Product category：Fiber Production System | Finished Composites Production System | Mould and Its Related Equipment

Nanjing OMA, established in 2011, is OMAX Corporation's exclusive distributor in China.OMAX and Nanjing OMA have both dedicated their efforts to bringing world's best abrasive waterjet technology into China. OMAX designed the new MAXIEM product line to fit China's specific market situation. And Nanjing OMA set up two exclusion demo centers in Nanjing and Shanghai for waterjets.Five series, over twenty models provide customers more solutions to fit different problems. ProtoMAX waterjet not only has the multifunctional characteristics of large abrasive waterjet, but is suitable for prototype design and small-scale production.

Product category：Cutting Machines | Research & Design | Training

OuNeng machinery focuses on the safe and intelligent heating and refrigeration equipment used in the composite industry: oil circulation mold temperature machine, water circulation mold temperature machine, refrigeration unit, cold and hot integrated machine, and the temperature control range is - 80 ℃ ~ 390 ℃. There are 2 R & D and production bases: Jiangning District, Nanjing + Shuangliu District, Chengdu. It has also obtained the manufacturing license of organic heat carrier boiler issued by the State Administration of quality supervision. It is a manufacturer of heating and refrigeration equipment with professional qualification.

Product category：Fiber Production System | Accessory Equipment & Tools

The company is a professional company specializing in R & D, design, manufacturing and sales of efficient and energy-saving industrial equipment. Headquartered in Nanjing, factory Changzhou Liyang. The products are non-standard customized, tailored, with an annual production of more than 500 sets, strong technical force, and large-scale production capacity. It mainly produces heat exchange products such as gas plate heat exchanger, high temperature heat exchanger, and clean hot air products such as gas (oil) hot air furnace. The main technical indicators of the products have reached the international advanced level and are widely used in VOC waste gas treatment, glass fiber, new materials, medicine, food, chemical industry and other fields.

Product category：Fiber Production System | Fiber Treatment & Handling Systems | Accessory Equipment & Tools | Environmental Protection System

NanJing Tongteng Composites had passed the ISO9001:2000 quality system certification in 2002. Our company is professionally manufacturer of pultrusion equipment, roll mat slitters, moulds. Additionally, we can produce various FRP profiles, cable tray, radome and types of stitch bonded fiberglass mats. Our products are not only well sold in China all around, but also well exported to Europe, America, mideast and other countries and regions.

Product category：Finished Composites Production System | Mould and Its Related Equipment | Technology Transfer | Finished Composites Parts

Nantong Kneading Mixing Machine co., Ltd is experted in sets of equipments for chemicals, silicone materials and some other related lines. The factory is Concentrated on design, manufacturing, sales and service of integrated science and technology enterprises. Keeping on research and development for kneading machine, internal mixer, mixing machine, drying machine for more than decade years. With great variety of products, Wide application and good market.

Product category：Finished Composites Production System

The IG710S delivers cost-effective measurement solutions through its ability to use selective NIR wavelengths to measure key value-added coatings and moisture content in converted products.The IG710S is delivered pre-calibrated for each application and is highly tolerant to the changing conditions found in the converting industry. This gauge combines low cost of ownership with long-term stability without the need for re-calibration, systematic monitoring or correction for drift. The gauge’s patented optics are able to tolerate web flutter of the order of ± 50mm (± 2.0ins) and the robust NDC measurement algorithms provided with each application mean that it is insensitive to within-product variations such as color and basis weight.

Product category：Inspection Instrument & Equipment

NDT Systems Inc. is a leading supplier of advanced non destructive testing equipment producing a wide range of ultrasonic thickness gages, bond testers, portable flaw detectors and precision ultrasonic transducers. Visit us at Booth 1907 to view our BondHub Bond Testing C-scan demonstration and other composite defect detection instruments on display.

Product category：Inspection Instrument & Equipment

As the leading manufacturers of thermal analysis instruments, NETZSCH offers the broadest range of products for thermal analysis, including the instruments for Differential Scanning Calorimetry, Thermogravimetry, Simultaneous Thermal Analysis, Dilatometry, Dynamic Mechanical Analysis, Thermomechanical Analysis, Coupling techniques, Thermal conductivity testing, Dielectric Cure Monitoring And Dielectic Analysis, Refractories Testing and Adiabatic Reaction Calorimeter. The working temperature of the instruments can be in the range from - 260 to 2800°C. Beginning from 1996, NETZSCH China has set up offices and service stations in Beijing, Shanghai, Guangzhou and Chengdu and other cities, together with a technical support center & application lab in Shanghai.

Product category：Inspection Instrument & Equipment

For 13 years project practice & leading technique in the field of hydraulic technology, HILEAD developed special purpose hydraulic press for composites product industry. Taking the advantage of state-of-art technology, HILEAD has become an leading hydaulic press supplier for the production of SMC、BMC, GMT, LFT-D in China. Our products are widely used in fields of ship and auto, building petrochemical, energy and building materials, electricity and electric appliances electro-communication, rail transportation, aeronautics, astronautics, etc.

Product category：Finished Composites Production System

Our company is a 30 years specializing in the production of various types of heating equipment of the private joint-stock enterprises, located in the Zhejiang Province, covers an area of 13766 square meters, the company now has staff of 145 bit, including 17 technical personnel. The company mainly engaged in non-standard industrial ovens, composite curing furnace, baking Road, and other professional heating equipment manufacturers. The company has strong product development and design strength and manufacturing capability, through the ISO9001 quality management system certification. Welcome customers at home and abroad come to visit the guidance.

Product category：Fiber Treatment & Handling Systems | Resin Production and Handling Systems | Autoclave

Nenghai Molding company has advanced molding technology and rich manufacturing experience in SMC mold and plastic injection mold of bumper, mask, grille, pedal, etc, outer decorative parts of automobile (SMC), such as shell of engineering truck (SMC), engine cover, coaming, operating house, fender, as well as auto light mold (BMC), etc. The company keeps innovating the technology of SMC compression mold continuously based on the concept of lightweight of automobile.

Product category：Mould and Its Related Equipment

Ningbo Shuangma Machinery Industrial Co., Ltd. was founded in 1998, is a national high-tech technology enterprise, gathered R&D, production and marketing services of precision servo energy-saving injection molding machines. Ningbo Shuangma has developed CIML series of carbon fiber composite material intelligent molding line, has made great achievements of molding process of carbon fiber thermoplastic composites, has won wide attention and good market response in the industry in 2015. Ningbo Shuangma has integrated high quality upstream and downstream resources, such as product design, mold design, process formula and automation equipment, to provide competitive overall solution for fiber reinforced thermoplastic composite molding process.

Product category：Additives | Other Raw Materials | Finished Composites Production System

Nobot invested 568 million yuan, covering an area of 143 mu. The main products are multi-joint industrial robots, intelligent three-dimensional warehouse, stacker and non-standard automation equipment integration. The company has two provincial-level Innovation Platform, a provincial inspection and testing center. Has Undertaken A number of major R & D programs in Shandong Province, has 84 national patents and 24 software copyrights, and participated in the formulation of four national industrial robot industry standards. Selected Shandong Province new and old kinetic energy conversion major project library preferred projects, the third batch of Gazelle enterprises in Shandong Province, Shandong Province high-end equipment manufacturing industry leader (breeding) enterprise library.

Product category：Fiber Treatment & Handling Systems | Finished Composites Production System | Accessory Equipment & Tools | Other Equipment & Tools

Nol-Tec is present in three continents and through the years has built reputation for handling abrasive and /or friable bulk materials. In addition to its core business in pneumatic conveying and blending, Nol-Tec has gained proficiency in mechanical conveying, weighing, dosing and system automation. Nol-Tec continues to grow, expand and develop technologies for the varies industries .Our team of dedicated individuals ensure that the innovations from our research and development are made available to our customers.

Product category：Finished Composites Production System | Accessory Equipment & Tools

Novelteq Ltd. is dedicated to the development of high-end optical instruments and equipment. The patented thermal wave imaging (TWI) technology has the advantages of non-contact, fast speed, intuitive result, and non-radiative, etc. The series TWI nondestructive testing equipment is suitable for detection of internal defects in composite materials, including delamination, dis-bond, porosity, poor adhesive, rich glue etc. Based on laser scanning TWI technology, the coating inspection instrument can effectively measure coating thickness and detect coating quality and bonding defects. The company is committed to provide broad nondestructive testing solutions to our customers with highest quality.

Product category：Inspection Instrument & Equipment