Founded in June, 2008, it is the wholly owned subsidiary of Sinoma Science & Technology Co., Ltd. It inherits the superior resources from Beijing FRP Research and Design Institute. We have an outstanding professional and technical team, advanced LFT-D online mixing injection /molding line, SMC sheet /BMC line, series dedicated presses, injection production line, RTM production line, coating line, automotive interior production line equipment and so on. Now established a long-term partnership with Cummins, China National Heavy Duty Truck, Shanxi Heavy Duty Truck, Foton, Dongfeng, FAW automobile and engine manufacturers. The company obtains ISO/TS16949, ISO14001, and GB/T28001 systems.

Product category：3D Woven | Research & Design | Technology Transfer | Engineering | Finished Composites Parts

Beijing Terminator Technology Development Co., Ltd. is committed to the industrial R&D and application of space-level high modulus carbon fiber materials. The company’s core R&D team has fabricated the “Pitch-based High Modulus Carbon Fiber” successfully in the process of tackling key technical problems over more than ten years. The average initial modulus tested by Ningbo Institute of Industrial Technology, CAS is up to 587.17GPa, which is equivalent to the international advanced level. At the moment, Ningbo Factory subordinated to TMNTCF is under construction. The quantity production era of domestic space-level high modulus carbon fiber is coming soon.

Product category：Carbon Fiber | Research & Design | Testing | Technology Transfer | Engineering

Our company manufactures high strength plastic product with higher strength and at cheaper cost compared with super engineering plastic. High-strength long fiber shooting out technology of our company reduced manufacturing process because it does not require pellet manufacturing process differently from existing shooting out method and the core technology is that raw materials can be mixed quite freely depending on requirement for the product. Super engineering FRP (Fiber reinforced plastics) manufactured through process of our company can replace metal product and high-priced super engineering plastic product because it surpasses strength of super engineering plastic, being a product that general resin is combined with long fiber.

Product category：Carbon Fiber | Polyurethane Resin | Raw Materials Related to Fibers Production | Engineering

 成立于1988年，注册资本3.5亿元，年销售额22亿元，隶属于国资委下属的世界500强企业—中国建筑材料集团有限公司。拥有多家控股公司，主要从事风机叶片、碳纤维、多功能铺地材料、碳芯电缆、玻璃钢管道、贮罐和高压气瓶、复合材料船艇、水处理等多项高新产业项目的生产、销售、相关技术和设备的研制、工程建设和项目总承包的国家重点高新技术企业。

Product category：Carbon Fiber | Pregreg | Engineering | Finished Composites Parts

The company is an independent DIAB Group company, provides world class composite service to companies with a desire to make innovative products in composites. The company consists of mechanical and process engineers, material scientists, naval architects and composite technicians with long term experience from various industries. Our consultants have extraordinary competence in different areas and are key in developing and delivering the most "value adding" offer in the composite industry. To assist our clients in rapidly developing high performance and innovative products, the company offers a complete set of consulting services including: design, engineering, testing, process consulting, training, tooling, materials and equipment. In addition to this, the company naturally takes on customer specific consulting requests.

Product category：Research & Design | Testing | Engineering | Training | Consultant

Empowering Technologies China is a wholly-owned subsidiary of Europe Technologies group (France) in China. ET Group has more than 30 years of experience in the industry. The equipment and robots developed and manufactured by ET group are dedicated to trimming, drilling, grinding, cutting, welding, shot peening and other treatments of composite and metal parts. The group provides turnkey solutions for aerospace, rail transit, energy, automobile and other users in the development and industrialization of processing technologies for composite materials, metal materials. The group's brands include SONATS, SONIMAT, GEBE2, SERVISOUD, PRODESS, GOBIO and others.

Product category：Fiber Treatment & Handling Systems | Prepreg Production and Handling Systems | Cutting Machines | Research & Design | Engineering

Shanghai Fuchem is specialized is engaged in the construction of high performance resin, paint and other products of the production, research and development, technology consulting and engineering construction science and technology company. The main products include: high performance high performance vinyl ester resin (corrosion of temperature resistant, impact resistance, a full range of ultra low shrinkage, flame retardant, flexible construction etc.), high performance insulating resin, and VEGF flake etc. Anticorrosion fields its application case culvert and various industries, such as industrial buildings, chemical plants, mining and metallurgy, insulation, pulp and paper, pharmaceutical, food, transportation, electric power, environmental protection and other industries.

Product category：Unsaturated Polyester Resin | Vinylester Resin | Epoxy Resin | Adhesive | Engineering

Graco manufactures and markets premium equipment to move, measure, control, dispense and spray a wide variety of fluid and powder materials. Our 3,500 employees serve thousands of customers in more than 100 countries; and, in 2017 we had net sales of nearly $1.5 billion.

Product category：Finished Composites Production System | Accessory Equipment & Tools | Engineering

Since our establishment in 1991, Hanshin Painting Systems, HASCO has continuously strived to be the premier manufacturer of Airless Spray Pumps & Accessories in Korea by our utmost effort in research and development with accumulated technology. Now we can offer many series Jam Extruder and some accessories such as Regulators, Sealant gun, and so on.

Product category：Resin Production and Handling Systems | Engineering

The company is a central air-conditioning, HVAC EQUIPMENT R & D, design, manufacturing, sales, installation in one of the large-scale modern, professional high-tech enterprises. The company covers an area of 500 acres, with state-level air conditioning enthalpy difference laboratory, ground source heat pump and water-cooled chiller unit laboratory and Product Design and Research Institute. Air Conditioning products: air source heat pump series, water (ground) source heat pump series, fresh air ventilator series, Fan Coil series, air processor series, end and ventilation smoke exhaust equipment, FRP products, cooling towers, water tank series, covers the whole set of air-conditioning systems and other supporting product design and production and sales.

Product category：Finished Composites Production System | Environmental Protection System | Research & Design | Engineering | Finished Composites Parts

Hebei Shengweijiye FRP Group Co., Ltd. is located in the North China Plain, near by the Hengda highway and the Beijing-Kowloon railway, thus its transportation and communication is very convenient. The company covers an area of 200,000 square meters with a construction area of 26,000 square meters and registered capital amounting to RMB 80 million Yuan. The company employees 580 people, including five senior titles, intermediate title of 36 people, junior technical staff of 236 people. My company has a long-term cooperation with Qinghua University, Wuhan Technology University, The Fourth and Design Institute Ministry of Machinery Electronics Industry, the Fourth Nuclear Institute, our company has a strong technical force with two-billion-yuan annual turnover.

Product category：Finished Composites Production System | Mould and Its Related Equipment | Environmental Protection System | Engineering | Finished Composites Parts

Hedrich Xiamen Vacuum Equipment Manufacturing Co., Ltd, was established on May 14, 1996, As a wholly-owned subsidiary company of Hedrich Group. Its vacuum products have been widely used and enjoyed a good reputation in the field of wind power, power transmission and distribution, power electrical equipment manufacturing industry, chemical, electronics, and other fields. And we lead the world's technological development in cutting-edge fields such as new energy vehicles, composite materials, and industrial big data systems. We are supplying mature and stable production equipment and intimate technical services to the customers at home and abroad, such as TPI, Vestas, Aeolon Group, ABB, Siemens, Schneider, TBEA, and XD Group.

Product category：Resin Production and Handling Systems | Prepreg Production and Handling Systems | Finished Composites Production System | Engineering | Training

Our company is located in the North China Plain, the geographical environment is superior, Daguang high-speed, Beijing-Kowloon Railway, Handan-Huang Railway intersect here, the traffic is very convenient. The company covers an area of 160,000 square meters, with a construction area of 52,000 square meters, registered capital of 10.8 million yuan and fixed assets of 160 million yuan. It is a well-known enterprise in Zaoqiang County and even in the national FRP industry, and a member unit of China FRP Industry Association. Our company has obtained six national patents. It was appraised as "provincial advanced enterprise", "scientific and technological enterprise", "contract-abiding and credit-abiding enterprise".

Product category：Engineering | Finished Composites Parts

HRC Group is one of the global leading composite solution providers, our 2,000 employees are located in 5 different countries in Eurasia, continue to offer high-quality, and innovative services covering the entire lifecycle of carbon fiber composites, from R&D to engineering design, industrialized serial production, recycling and reuse, HRC is dedicated to integrating sustainable development principles into technological advancements and expanding application possibilities, continuously exploring the multifaceted advantages of carbon fiber, contributing to a lighter and greener future.

Product category：SMC/BMC/DMC | Pregreg | Research & Design | Testing | Engineering | Training | Finished Composites Parts

Olymspan Composites was established by a group of young but experienced specialists in composites technology. The network of contacts, the technical and technological skills, the strong innovation component and the partners enthusiasm, are the fundamental tools that have led Olymspan Composites to be, today, strong with a team of young, motivated and highly competent people. In its young history, the company has grown steadily, acquiring prestigious clients and commissions, while expanding its technical capabilities. Keeping a farsighted vision and promoting technological innovation, Olymspan Composites has distinguished itself for offering the highest quality products and services.

Product category：Autoclave | Research & Design | Testing | Engineering | Finished Composites Parts

Kangde Composites (KDC), subsidiary of Kangde Investment Group, mainly provides integrated solution of CFRP and has built the world’s largest and most technologically advanced Industrial 4.0 intelligentized plant with an annual capacity of 1.5 million CFRP parts. Meanwhile, aiming at high-end CFRP application market, the company is actively expanding in fields such as civil aviation, high-end industry, rail transportation and consumer electronics to become the world leading enterprise in domain of CFRP and promote the industrial application of carbon fiber.

Product category：Carbon Fiber | Research & Design | Engineering | Finished Composites Parts

Manufacturing expertise in fiber composites For many years, KraussMaffei has been working with widely varying processes for manufacturing parts made of fiber-reinforced plastic (FRP). These processes have traditionally evolved from injection molding technology and reaction technology (PUR). Today our process portfolio ranges from injection molding of components with short-glass-fiber reinforcement to high-strength, lightweight parts with a complex mesh structure in a reactive matrix. We set the highest priority on manufacturing processes that are automation-capable.

Product category：Accessory Equipment & Tools | Mould and Its Related Equipment | Other Equipment & Tools | Engineering

LIHSHIANN was founded on Apr, 2004 in Kunshan special high tech zone, bases on 32 years engineering experiences, we dedicate in bring in high technology, excellent manufacturing system to our customers and servicing our customers, offering best quality and fastest speed to get most satisfaction from our customers. We are agent for all following product: HELD TECHNOLOGIE GmbH, Lauffer laminating system and handling system from Germany, Cedal CCD Pinless Thermal bondind system, and Pluritec X ray targeting drilling machine from Italy. Our main target is working and growing together with our customers by our high technology system and service.

Product category：Finished Composites Production System | Other Equipment & Tools | Engineering

Osmanuv Machinery Equipment Co., Ltd., is a set of design, research,development, manufacturing as one of the spraying equipment, roller coating equipment, spray coating equipment, scraping device machine,robot arm such as a professional high-tech enterprises, product design drying with microwave, IR, UV,and biological particles such as in many ways.

Product category：Other Equipment & Tools | Research & Design | Engineering | Consultant

Our company's main products include FRP corrugated sheet production line, FRP gel coat flat/corrugated sheet production line, FRP decorative panel production line, FRP pultrusion line, etc. The equipment has passed the EU CE certification, with excellent quality, beautiful appearance, low maintenance rate, and equipped with waste edge recovery, dust absorption etc. We sincerely provide customers with stable, convenient operation, reasonable price products. Until now, our machines have already been exported to America, Russia, England, Saudi Arabia, Brazil, Poland, Singapore, Malaysia, Thailand, India, Indonesia, South Africa, Kenya, Chile, Mexico, Turkey etc.

Product category：Finished Composites Production System | Mould and Its Related Equipment | Engineering | Finished Composites Parts

Qinhuangdao Yaohua FRP Co., Ltd., is integrated research, design, production, testing, and service functions during 50 years development. We are one of the pioneering company in China FRP industry and China's FRP Industry Association executive director units. Our products conform to GB/T19001-2000 & GJB9001A-2001. Quality system certification, include military, civilian and export products. The civilian and export products including FRP boat,FRP transparency sheet, unsaturated polyester resins, cooling towers, anti-corrosion slot, pot; the pultrusion forming profiles, grid, the winding forming tube, the molding forming valves, filter plates, and so on.

Product category：Unsaturated Polyester Resin | Engineering | Finished Composites Parts

SEAH GREEN TECH was established in 2001, specializing in design, manufacture & construction of air pollution prevention field. Main products are FRP fan (custom design to suit your specific work needs), FRP part,wet scrubber, dry scrubber etc. We have professional design & producing engineers with perfect after-sale service. Major clients included SK Hynix, Samsung Electronics etc. Based on long-year engineering experience and outstanding technology, quality of the products are assured. We will accompany our customers under our prime goal of the customer-satisfaction philosophy.

Product category：Environmental Protection System | Research & Design | Engineering | Finished Composites Parts

Umeco is a name synonymous with innovation and service. As an international provider of advanced composite structural and process materials, we work primarily with organisations across aerospace and defence, renewable energy, motorsport and automotive, rail and recreation industries. Umeco focuses on developing innovative solutions that challenge existing manufacturing processes and provide customers with real advantages in cost and performance. Umeco has developed ground-breaking out-of-autoclave technology, to meet the needs of large structure manufacturers in the aerospace, defence and wind energy markets, that has been qualified to Airbus’ specifications. Umeco’s rail and aircraft interiors phenolic prepregs offer excellent mechanical properties combined with exceptional fire performance while taking weight out of the structures. Umeco manufactures high-performance vacuum bagging film and release film, and supplies all vacuum bagging consumables tailored to customer’s requirements. With autoclave, clean room, film conversion and kitting capabilities, Umeco offers dedicated customer support from the planning stage through to project completion. Umeco supplies a range of innovative tooling products and provides extensive design and manufacturing capability – offering to its customers a unique approach to advanced composites tooling. From manufacturing and distribution facilities in Asia, Europe, and the USA, Umeco has an international customer base and is committed to delivering innovation and real advantage to the market.

Product category：Epoxy Resin | Pregreg | Gel Coat | Adhesive | Mould Release Materials | Raw Materials Related to Moulds Making | Finished Composites Production System | Research & Design | Testing | Engineering

The company is a high-tech manufacturer specializing on the valves and fluid control equipment. The company has multiple CNC machining center, CNC lathe, milling machine, and a variety of execution device testing equipment. The company has been committed to its Research and Development, Sales anf Technical support. SEN mainly speciailized on producing ball valves and control valves, and they are widely used inpower plant, chemical industry, water treatment, petrol-chemical and nature gas industry, construction, etc.

Product category：Resin Production and Handling Systems | Inspection Instrument & Equipment | Environmental Protection System | Autoclave | Engineering

The company was established in October 2005, mainly engaged in the development, production, repair and service of resin matrix composite products. It is an enterprise with independent legal personality. At present, there are more than 190 employees. The company has established "academician expert workstation" and "industry university research base", which is the chairman unit of "Hubei composite material industry alliance". The company has strong technical force, a number of technologies to reach the international advanced, domestic leading level. The company has many years of successful experience in research and production, with more than 60 professionals in structural design, acoustic design, process design, quality control, production management, market development, etc.

Product category：Research & Design | Engineering | Finished Composites Parts

The company specializes in fiberglass fabric manufacture, as well as designing, developing, and manufacturing fiberglass fabric coated products according to the customer special requirement. We also can make the special fiberglass fabric coated （such as pvc,ptfe and silicone) products according to your special requirement.

Product category：Glass Fiber Woven | Aramid Fiber | Research & Design | Testing | Engineering